# Sleep Number Climate360 (Split King) Disassembly

# Sleep Number Climate360 (Split King) Disassembly

This guide covers the disassembly of the Sleep Number Climate360 Split King for the 2026 move to Guess Rd.

### Essential Resources
*   **Split King Separation Video:** [How To Move A Sleep Number® FlexFit™ Base](https://www.youtube.com/watch?v=Ixv8gGzxRKQ) (Key section starts at 2:40).
*   **Official Support Guide:** [Moving My Sleep Number Bed](https://support.sleepnumber.com/hc/en-us/articles/360020305694-Moving-My-Sleep-Number-Bed).

### Pre-Move Checklist
- [ ] **Caps:** Obtain 8 air chamber caps (4 for mattresses, 4 for pump). 
- [ ] **Inflate:** Use the app to inflate both sides to 100 before disconnecting anything.
- [ ] **Seal:** Disconnect hoses and immediately cap both the chambers and the pump side.

### Disassembly Steps
1.  **Electronics:** Unplug the main power and the "Sync Cable" that links the two base halves.
2.  **Climate Modules:** Unplug data cables for foot warmers. Label them with tape.
3.  **Split King Separation:**
    *   Locate and unscrew the plastic "speed screws" connecting the frame halves.
    *   Watch for magnet sensors on the base; they are easily knocked off.
4.  **Packing:**
    *   Bag both mattresses (keep them FLAT; never fold or stand on end).
    *   Secure the FlexFit articulation arms with heavy-duty zip ties so they don't "flop" during transit.